Rijksmonumentenregister · Netherlands
DRU
Ulft, Gelderland, Netherlands
The record
- Designation
- National monument (rijksmonument)
- Class
- Industrie
- Function
- Fabriekshal
- Category
- onroerend gebouwd
- Built
- 1902
- Address
- Hutteweg 24, 7071 BV Ulft (Oude IJsselstreek 25)
- Place
- Ulft
- Municipality
- Oude IJsselstreek
- Province
- Gelderland
- Country
- Netherlands
- Coordinates
- 51.89518, 6.38373
- Part of complex
- 523690
- Monument number
- 523692
Slide toward Today to fade the historical sheet and see the modern map underneath.
University Library, Vrije Universiteit AmsterdamUniversity Library, Vrije Universiteit AmsterdamDavid Rumsey Map Collection, Stanford Libraries
3 historical maps cover this location, the earliest the 1880 map "Composite: 328. Bocholt." (David Rumsey Map Collection, Stanford Libraries).
This monument in the Rijksdienst voor het Cultureel Erfgoed's register ↗
The register's description
Omschrijving
GEBOUW B
De MODELMAKERIJ werd gebouwd in 1902, met stijlmotieven die zijn ontleend aan de neo-renaissance. De portiersloge is van later datum. Mogelijk is de modelmakerij ook een ontwerp van architectenbureau Beltman uit Enschede. Het gebouw heeft een lichte verdraaiing t.o.v. de rest van de bebouwing die waarschijnlijk door de loop van de perceelsgrens komt. Het gebouw is gesitueerd aan de ingang van het fabriekscomplex aan de Hutteweg, die vanaf de begintijd van DRU de toegangsweg heeft gevormd.
Het pand is gebouwd op een rechthoekig grondplan en telt drie bouwlagen. De gevels zijn opgetrokken in roodbruine baksteen. Een grijze steen, deels afgewisseld met gele verblendsteen, is ter decoratie verwerkt in de over de gehele breedte van het gevelvlak lopende horizontale banden. Een gele verblendsteen is toegepast in het boogfries en de daklijst. Het metselwerk is uitgevoerd in kruisverband. Rondom loopt een uitgemetselde plint.
De gevelvlakken hebben een horizontale en verticale geleding door de toepassing van segmentboogvormige, ijzeren ramen; op de begane grond met een twintigruits verdeling, op de eerste verdieping een zestienruits verdeling en een achtruits verdeling op de tweede verdieping. De horizontale geleding wordt versterkt door banden, uitgevoerd in grijze steen en gele verblendsteen, die de ramen onderling verbinden ter hoogte van boven-, onder- en wisseldorpel. De gevelvlakken worden geflankeerd door gemetselde pilasters, die aan de bovenzijde opgaan in het boogfries en de verhoogde gemetselde daklijst van het platte dak. In de oorspronkelijke toestand stond op deze daklijst een bijna manshoog open muurwerk als balustrade. Decoratieve muurankers, door DRU zelf gegoten, sieren de gevelvlakken.
De WESTGEVEL is drie vensterassen breed. Op de begane grond rechts is een vijfzijdige erkerachtige uitbouw geplaatst. Op een bakstenen borstwering zijn in vier zijden een venster met een van roeden voorzien bovenlicht geplaatst; het vijfde vlak bevat een niet-oorspronkelijke deur met een zesruits bovenlicht. De geprofileerde, overstekende kroonlijst rust op klossen.
De ZUIDGEVEL is tien vensterassen breed. Aan de voorzijde is tegen deze gevel de portiersloge gebouwd, die eenzelfde architectuur heeft, maar van later datum is. Ook deze portiersloge was oorspronkelijk voorzien van een balustrade.
In de NOORDGEVEL hebben enkele ingrepen plaatsgevonden. Eén segmentboogvormig, ijzeren raam op de begane grond is vervangen door een schuifdeur en de originele garagedeur is vervangen door een grote, stalen schuifdeur.
De constructie in het INTERIEUR is opgebouwd uit stalen/gietijzeren kolommen en liggers, waarover de houten vloerbalken liggen. De ijzeren kolommen worden op de hogere verdiepingen kleiner in dimensionering en hebben een bijzondere detaillering.
Waardering
- Van architectuurhistorisch belang vanwege het goede en redelijk gave voorbeeld van een fabrieksgebouw uit 1902. Het drielaagse gebouw is onder meer bijzonder door de toepassing van het in gele verblendsteen uitgevoerde boogfries onder de dakrand.
- Van stedenbouwkundig belang vanwege de situering aan de ingang van het fabriekscomplex aan de Hutteweg, die vanaf de begintijd van DRU de toegangsweg heeft gevormd. Het gebouw vormt een onderdeel van een historisch gegroeid fabrieksterrein en speelt daarin een beeldbepalende rol. Daarnaast heeft het object een ensemblewaarde in relatie tot zijn omringende bebouwing.
- Van cultuurhistorisch belang vanwege zijn oorspronkelijke functie welke is verbonden met de belangrijke industriële ontwikkeling in de Liemers en daarmee een aspect van de economische geschiedenis vertegenwoordigt.
English translation
The text above is the record as published by the Rijksdienst voor het Cultureel Erfgoed, in Dutch. The English below is a machine translation made by TreeAlive, not by the Rijksdienst voor het Cultureel Erfgoed; it has not been checked by a person. Where the two differ, the original is the record. Report a translation error: privacy@treealive.com
Description
BUILDING B
The MODELMAKING WORKSHOP was built in 1902, with stylistic motifs borrowed from neo-renaissance. The porter's lodge is of a later date. It is possible that the modelmaking workshop is also a design of the architectural firm Beltman from Enschede. The building has a slight rotation in relation to the rest of the built environment, which is probably caused by the course of the plot boundary. The building is situated at the entrance of the factory complex on the Hutteweg, which has formed the access route from the beginning of DRU.
The building is constructed on a rectangular ground plan and has three storeys. The facades are built up in reddish-brown brick. A grey stone, partly alternated with yellow facing brick, is incorporated for decoration in horizontal bands running across the entire width of the facade surface. Yellow facing brick is used in the segmental arch frieze and the roof edge. The brickwork is executed in cross bond. A rendered plinth runs all around.
The facade surfaces have horizontal and vertical articulation through the application of segmentally arched, iron windows; on the ground floor with a twenty-paned division, on the first floor a sixteen-paned division and an eight-paned division on the second floor. The horizontal articulation is reinforced by bands, executed in grey stone and yellow facing brick, which connect the windows to each other at the level of upper, lower and intermediate lintels. The facade surfaces are flanked by brickwork pilasters, which at the top merge into the segmental arch frieze and the raised brickwork cornice of the flat roof. In its original condition, an almost man-high open brickwork balustrade stood on this cornice. Ornamental wall anchors, cast by DRU themselves, adorn the facade surfaces.
The WEST FACADE is three window axes wide. On the ground floor on the right an angled bay window projection is placed. On a brick parapet, a window with glazing bars and fanlights is placed on four sides; the fifth face contains a non-original door with a six-paned fanlight. The profiled, projecting cornice rests on brackets.
The SOUTH FACADE is ten window axes wide. At the front, against this facade, the porter's lodge is built, which has the same architecture but is of a later date. This porter's lodge was also originally provided with a balustrade.
Several alterations have taken place in the NORTH FACADE. One segmentally arched, iron window on the ground floor has been replaced by a sliding door and the original garage door has been replaced by a large, steel sliding door.
The construction in the INTERIOR is built up from steel/cast iron columns and beams, over which the wooden floor joists lie. The iron columns become smaller in dimension on the higher storeys and have special detailing.
Valuation
- Of architectural historical importance as a good and reasonably well-preserved example of a factory building from 1902. The three-storey building is notable in particular for the application of the segmental arch frieze executed in yellow facing brick under the roof edge.
- Of urban planning importance due to its location at the entrance of the factory complex on the Hutteweg, which has formed the access route from the beginning of DRU. The building forms part of a historically developed factory site and plays a visually defining role in it. Additionally, the object has ensemble value in relation to its surrounding built environment.
- Of cultural-historical importance due to its original function which is connected to the important industrial development in the Liemers and thus represents an aspect of economic history.
Nearby in the register
- DRUIndustrieunder 1 mi
- DRUIndustrieunder 1 mi
- DRUIndustrieunder 1 mi
- Fabriekshal, Hutteweg 24Industrieunder 1 mi
Other entries of the same register within about three miles of this one, by straight line.