Rijksmonumentenregister · Netherlands
Industrie, de Loop 28
Oirschot, Noord-Brabant, Netherlands
The record
- Designation
- National monument (rijksmonument)
- Class
- Industrie
- Category
- onroerend gebouwd
- Built (approximately)
- 1899 - 1917
- Address
- de Loop 28, 5688 EW Oirschot
- Place
- Oirschot
- Province
- Noord-Brabant
- Country
- Netherlands
- Coordinates
- 51.50430, 5.31344
- Part of complex
- 519153
- Monument number
- 519847
Slide toward Today to fade the historical sheet and see the modern map underneath.
University Library, Vrije Universiteit AmsterdamUniversity Library, Vrije Universiteit AmsterdamUniversity Library, Vrije Universiteit Amsterdam
3 historical maps cover this location, the earliest the 1897 map "Kaart ten behoeve der manoeuvres van de 3e divisie infanterie in 1897 : (in 2 bladen) op de schaal van 1:50.000" (University Library, Vrije Universiteit Amsterdam).
This monument in the Rijksdienst voor het Cultureel Erfgoed's register ↗
The register's description
Omschrijving
Inleiding
De sobere bakstenen FABRIEKSHAL die aan de noordelijke zijde van complexonderdeel (2) grenst, is tussen 1917 en 1919 gebouwd naar ontwerp van de Tilburgse architect J. Donders. Het betreft een voor die dagen moderne produktiehal met sheddaken en aangrenzende droogkamer, werkplaats, machinekamer en ketelhuis met fabrieksschoorsteen. Na de Tweede Wereldoorlog is het gebouw aan de noordelijke zijde door nieuwe bedrijfshallen ingesloten.
Omschrijving
Het gebouw heeft een langgerekte rechthoekige plattegrond, telt één bouwlaag en is, op ketelhuis, machinekamer en werkplaats na, gedekt met in totaal elf, aan de noordelijke zijde geopende sheddaken. De machinekamer met bovengenoemde annexen heeft een platdak met schilden en lichtkap. Het ketelhuis, aan de noordelijke zijde in het complex ondergebracht, heeft aan de oostelijke zijde middels een rookkanaal aansluiting op de hoge, in doorsnede ronde fabrieksschoorsteen, die met de sheddaken het silhouet van de fabriek bepaalt.
De sobere gevels zijn opgetrokken in baksteen en worden per vak gescheiden door een eenvoudige gemetselde liseen. In de topgevels bevinden zich kleine rondlichten. In de westelijke gevel van het complex is de produktiehal bereikbaar via een getoogde, opgeklampte inrijpoort. De droogkamer heeft een opgeklampte deur. Daarentegen is de gevel van de machinekamer met annexen relatief geopend: beglaasde vleugelpaneeldeuren met hoge bovenlichten zorgen, naast de lichtkap op het dak, voor een goede lichtinval. In het interieur is onder meer van belang de bijzondere kapconstructie, die een zeer brede overspanning mogelijk maakte. Daarnaast is in de voormalige stoommachinebehuizing nog het metalen luik van het rookkanaal aanwezig, dat leidde naar de nog in gebruik zijnde bakstenen fabrieksschoorsteen aan de oostelijke zijde van het gebouw. De oude stoommachine met Cornwallketel (1917) is geamoveerd.
Waardering
De fabriekshal is van algemeen belang. Het gebouw heeft cultuurhistorisch belang als voorbeeld van de sociaal-economische ontwikkeling van de meubelnijverheid in de negentiende en twintigste eeuw en als staalkaart van de typologische ontwikkeling van de gebouwen voor de meubelindustrie tussen 1860 en 1920. Het is architectuurhistorisch van belang als voorbeeld van een voor de bouwtijd moderne produktiehal en als voorbeeld van het werk van de architect Donders. Het heeft ensemblewaarde als onderdeel van een complex met uiteenlopende gebouwen, die de ontwikkeling van de meubelindustrie illustreren. Het is tevens van belang vanwege de gaafheid van het exterieur.
English translation
The text above is the record as published by the Rijksdienst voor het Cultureel Erfgoed, in Dutch. The English below is a machine translation made by TreeAlive, not by the Rijksdienst voor het Cultureel Erfgoed; it has not been checked by a person. Where the two differ, the original is the record. Report a translation error: privacy@treealive.com
Description
Introduction
The austere brick FACTORY HALL adjoining the northern side of complex component (2) was built between 1917 and 1919 to a design by Tilburg architect J. Donders. This is a production hall of modern design for its time, with shed roofs and adjoining drying room, workshop, engine room and boiler house with factory chimney. After the Second World War, the building was enclosed on the northern side by new industrial halls.
Description
The building has an elongated rectangular floor plan, comprises one storey, and is covered, except for the boiler house, engine room and workshop, with a total of eleven shed roofs opening to the north. The engine room with the aforementioned annexes has a flat roof with shutters and a skylight. The boiler house, housed on the northern side of the complex, has on its eastern side a connection by means of a flue to the tall, circular-section factory chimney, which together with the shed roofs determines the silhouette of the factory.
The austere facades are built in brick and are separated per bay by a simple brick pilaster. Small circular windows are located in the gable ends. In the western facade of the complex, the production hall is accessible via a rounded, bolted-on loading gate. The drying room has a bolted-on door. By contrast, the facade of the engine room with annexes is relatively open: glazed casement doors with tall fanlights provide, together with the skylight on the roof, good natural lighting. In the interior, the exceptional roof truss structure is notable, as it permitted a very wide span. Furthermore, in the former steam engine housing, the metal flap of the flue is still present, which led to the still-functioning brick factory chimney on the eastern side of the building. The old steam engine with Cornwall boiler (1917) has been removed.
Valuation
The factory hall is of general importance. The building has cultural-historical significance as an example of the socio-economic development of the furniture industry in the nineteenth and twentieth centuries and as a compendium of the typological development of buildings for the furniture industry between 1860 and 1920. It is of architectural-historical significance as an example of a production hall that was modern for its construction period and as an example of architect Donders' work. It has ensemble value as a component of a complex with diverse buildings that illustrate the development of the furniture industry. It is also significant because of the integrity of its exterior.
Nearby in the register
- Fabrieksgebouw, de Loop 6Industrieunder 1 mi
- Boerderij, Rijkesluisstraat 56Boerderijunder 1 mi
- Boerderij, Rijkesluisstraat 54Boerderijunder 1 mi
- WoonhuisBedrijfs-,fabriekswoningunder 1 mi
Other entries of the same register within about three miles of this one, by straight line.