TreeAlive
‹ Rijksmonumentenregister, Netherlands

Rijksmonumentenregister · Netherlands

Industrie, Van Nelleweg 43

Rotterdam, Zuid-Holland, Netherlands

The record

Designation
National monument (rijksmonument)
Class
Industrie
Category
onroerend gebouwd
Address
Van Nelleweg 43, 3044 BC Rotterdam (and others)
Place
Rotterdam
Province
Zuid-Holland
Country
Netherlands
Coordinates
51.92388, 4.43261
Part of complex
523427
Monument number
46869

Slide toward Today to fade the historical sheet and see the modern map underneath.

David Rumsey Map Collection, Stanford Libraries

5 historical maps cover this location, the earliest the 1636 map "Hollandiae meridionalis descriptio nova" (David Rumsey Map Collection, Stanford Libraries).

Get directions ↗

This monument in the Rijksdienst voor het Cultureel Erfgoed's register ↗

The register's description

Fabriekscomplex van Nelle. Fabriekscomplex, bestaande uit een tabaks-, koffie- en theefabriek - aansluitend naast elkaar geplaatst, met een gezamenlijke lengte van circa 220 meter - alle drie plat-afgedekt, maar in hoogte telkens afnemend en bij de tabaks- en koffiefabriek voorzien van sheddaken; nabij de ingang een vrijstaand kantoorgebouw - met een concave en een haakse vleugel, verbonden met de tabaksfabriek door middel van een luchtbrug; midden tegenover de tabaksfabriek een ketelhuis met bijgebouwen en schoorsteen; tegenover de koffiefabriek een centraal expeditiegebouw; tegenover de theefabriek een L-vormig werkplaatsen-, annex garage-gebouw; het geheel is ontworpen door J.A. Brinkman en L.C. van der Vlugt in 1925-'30, in Nieuw-Zakelijke stijl, in opdracht van C.H. van der Leeuw.

De fabrieken zijn gebouwd met behulp van een gewapend beton-constructie waarbij - voor het eerst in Nederland - gebruik is gemaakt van achtzijdige, paddestoelvormige kolommen en waarbij de gevels niet-dragend zijn, doch over de gehele breedte voorzien van in zeer smalle stalen kozijnen gevatte draairamen van halve breedte ten opzichte van het kantoor waarbij de glasmaat is gebaseerd op het toenmalige tuindersglas; aan de lange zijden staan de ramen in een verhouding van 2 : 1 ten opzichte van de stalen borstweringen, ten behoeve van zoveel mogelijk uitzicht voor het personeel, aan de korte zijde is de verhouding vanwege de aldaar gesitueerde bijzondere ruimten andersom en zijn de borstweringen van steen. Op de hoeken zijn namelijk vooruitstekende trappehuizen in combinatie met liftschachten, toilet-, was- en kleedruimten, geplaatst, teneinde de eigenlijke fabrieksruimten ononderbroken te houden; tevens zijn de gebouwen daartoe gedeeltelijk onderkelderd.

De beganegrondverdieping is daarentegen hoger ten opzichte van de andere bouwlagen; de vensters zijn langer ten gunste van zoveel mogelijk daglicht, bovendien is nog een aparte halfondergrondse gang met zwart betegelde gevel aangebracht langs alle fabrieksgebouwen doorlopend aan de voorzijde ten behoeve van de directie. De fabrieksgebouwen bezitten een aparte fundering van betonnen heipalen ter plaatse van de weeginstallaties bij hun oorspronkelijke situering.

Voorts zijn de gebouwen m.u.v. het centrale expeditiegebouw voorzien van een omlopend, buisvormig hekwerk aan de bovenzijde, alsmede van een apart leidingbuizenstelsel in de kelders. De trappenhuizen bevatten stalen buisleuningen, met roodgeverfde leuningen; de meeste deuren zijn van staal.

De tabaksfabriek (1926-'28) telt acht bouwlagen en bevat boven het oostelijk trappehuis een vrijwel rondom uitkragend uitzichtspaviljoen op een slakkehuisvormige plattegrond opgetrokken in staal en glas, waarvan de bovenramen een bijna kwartrond profiel bezitten met rond gegoten glasruiten. Dit trappehuis bezit overigens een geheel uit vensters bestaande voorgevel, welke om de hoeken wordt voortgezet, maar aan de Z.O.-zijde verder is gesloten met uitzondering van een cirkelvormig venster bij de begane grond, nabij de uitspringende kleedkamervleugel, die op de beganegrond open is gelaten waardoor de drie in de openlucht staande kolommen de ingang benadrukken.

Het noordelijk trappehuis is in vergelijkbare trant uitgevoerd, zij het dat de voortgezette N.W.-wand geheel van vensters is voorzien; de N.W.-wand van de eigenlijke fabrieksruimte is daarentegen geheel gesloten. Op de beganegrond is aan de N.O.-zijde een lage, geheel beglaasde schakelruimte uitgebouwd. De eigenlijke fabrieksruimte is veertien vakken breed en drie vakken diep. Aan de achterzijde zijn echter de droogruimten - ter hoogte van een bouwlaag en rondom in oorsprong voorzien van een lage reeks vensters - uitgebouwd en in oorsprong overhuifd door een twaalftal afgeronde sheddaken.

De koffiefabriek (1928-'29) telt zes bouwlagen, waarbij wegens de voor het keuren van de koffie verlangde lichtinval, de vloer op de derde verdieping gedeeltelijk is weggelaten, met als gevolg dat de glazen N.W.-gevel hier niet wordt onderbroken; aan de achterzijde springen de drie bovenste bouwlagen iets minder dan een vak terug; voorts bezit de allerbovenste bouwlaag waar in oorsprong de sorteerafdeling was gesitueerd vierkante kolommen in het midden, naast paddestoel-kolommen; ten behoeve van een maximale en neutrale lichttoetreding zijn boven elk vak sheddaken aangebracht die vanwege de oriëntatie op het noorden scheef op de overige ruimten zijn geprojecteerd.

De eigenlijke fabrieksruimte is hier zestien vakken breed en drie, respectievelijk twee, vakken diep. Op het dak is ter reclame de naam van de fabrieken aangebracht door middel van losse letters, gesteund door een staalconstructie, naar ontwerp van de architecten. Het drie vakken brede trappehuis, met annexen, bezit grotendeels gesloten wanden met lage, horizontale vensterstroken, en is op de beganegrond opengelaten, ter benadrukking van de ingang aldaar; het is zodanig geplaatst dat aan de N.W.-zijde nog twee vakken van de fabrieksruimte daarachter doorlopen.

De theefabriek (1928-'29) telt drie bouwlagen en is voor het overige uitgevoerd als de tabaksfabriek; de eigenlijke fabrieksruimte is acht vakken breed en drie vakken diep. Hier bevinden zich nog twee oorspronkelijke mengmachines vervaardigd door Bartlett & Son Ltd,. Het terzijde aangebouwde trappehuis met bijruimten springt ten opzichte hiervan aan beide zijden in; de N.O.-wand is aan de linkerzijde geheel gesloten en aan de rechterzijde geheel van vensters voorzien; de Z.W.-wand is hieraan spiegelbeeldig; de korte eindgevel aan de N.W.-zijde is geheel van vensters voorzien.

Het kantoorgebouw (1928-'29) bevat een concave vleugel ter hoogte van drie bouwlagen en ter breedte van zeven vakken, een haakse vleugel met een vide waarin een insteek, en twee bouwlagen daarboven, ter breedte van acht vakken, en een spievormige verbindingsruimte ter hoogte van de vide.

Het geheel is opgetrokken met gebruikmaking van een skeletconstructie van betonnen kolommen en wat betreft de schuine 2-gevel van stalen kolommen en voor het overige in vergelijkbare trant uitgevoerd als de fabrieksgebouwen. Ook dit gebouw is onderkelderd en zoveel mogelijk van stalen draairamen voorzien. De twee bovenste bouwlagen van de concave vleugel hebben aan de ingezwenkte zijde een licht overstek; aan de linkerzijde bevinden zich een drietal garages, aan de rechterzijde de ingangspartij - met stoep - waarbij wederom de omsluitende wand achterwege is gelaten.

De in de openlucht staande steunkolommen zijn met zwarte tegels bekleed, evenals die bij de garages. Op de hoek van de concave en de haakse vleugel sluit aan de N.W.-zijde ter hoogte van de tweede bouwlaag de luchtbrug van staal en glas met de tabaksfabriek aan; daarachter is een licht uitspringend trappehuis aangebracht met afgeronde zijde. Inwendig zijn de kantoorruimten zoveel mogelijk opengelaten; in de haakse vleugel wordt de gehele vide in beslag genomen door een kantoorzaal, waarin enkele in staal en glas uitgevoerde spreekkamers zijn afgescheiden; de insteekverdieping is bestemd voor de directie en bevat een ingezwenkte galerij die in open verbinding staat met de kantoorzaal. Hier bevindt zich nog ten dele het oorspronkelijke meubilair, bestaande uit stalen buisstoelen en -tafels met hardblauwe ronde bladen.

Het eigenlijke ketelhuis (1928-'29, uitgebreid 1930-'31) is in gewapend beton opgetrokken op een vierkante grondslag en wordt door twee bolronde asfaltdaken overdekt; de Z.O.-wand is geheel gesloten met uitzondering van de vensters in de ronde top; de N.O.-gevel bevat drie lage vensterreeksen; de uitgebouwde Z.W.-gevel bestaat daarentegen geheel uit vensters, evenals de lagere en nog meer naar voren uitgebouwde pompenkamer die dan ook inwendig wordt gesteund door zich naar beneden verjongende stalen geklonken kolommen met I-profiel; de smalle en hoge hydrofoorruimte, die aan de N.W.-zijde hiervan is gesitueerd en een drietal stalen geklonken watervaten bevat, vervaardigd door De Nayer te Willebroek, is geheel gesloten en ondersteunt tevens de nog verder naar achteren uitstekende kolenbergplaats, die aan de N.O.-zijde rust op een cilindervormige schacht. Voor de Z.W.-hoek van dit complex bevindt zich de taps toelopende, achtzijdige schoorsteen, die op elke hoek met ribben is verzwaard, op een betegelde sokkel.

Het blokvormige expeditiegebouw (1929-'30) ter hoogte van drie bouwlagen bevat gesloten zijwanden en geheel van vensters voorziene lange gevels, en is opgetrokken volgens dezelfde bouwwijze als de tegenover liggende fabrieksgebouwen waarheen door middel van beglaasde, vier stalen luchtbruggen een rechtstreeks transport is mogelijk gemaakt.

De werkplaatsen en garages zijn ondergebracht in een L-vormig bedrijfsgebouw (1929-'30) ter hoogte van een bouwlaag, waarvan de gevels geheel uit vensters bestaan; de binnenruimten worden door kolommen verdeeld, waarbij elk vak extra wordt verlicht via een sheddak.

Dit fabriekscomplex geldt als schoolvoorbeeld van Nieuwe Zakelijke Stijl doordat het ontwerp is gebaseerd op een voorafgaande analyse van het toenmalige fabricageproces en wegens de verdere toepassing van algemene functionalistische principes zoals de nadruk op zoveel mogelijk toetreding van licht en lucht, op doelmatigheid, gunstige situering en flexibiliteit van de verschillende ruimten met inbegrip van uitbreidingsmogelijkheden, en wegens de met deze principes verbonden aesthetiek - met nadruk op de transparantheid der bouwvolumes zowel inwendig als uitwendig (ontmaterialisering) - door het gebruik van smalle staalprofielen in de vliesgevels en scheidingswanden, alsook door de toepassing van vele ononderbroken ruimten, op de eigen kwaliteiten van de toegepaste materialen en op gebruik van ritme en heldere verhoudingen. Tevens is dit een der eerste complexen met een paddestoel-kolomconstructie en het merendeel der heipalen in gewapend beton en met toepassing van vliesgevels, bestaande uit staal en glas, en daardoor is het een baanbrekend werk in de ontwikkeling van de moderne architectuur en van internationale betekenis. Door de grote aandacht voor zo gunstig mogelijke arbeidsomstandigheden - maximale toetreding van licht en lucht, uitzicht, hygiene, aanwezigheid van sportvelden en bibliotheek - is dit fabriekscomplex bovendien van belang in sociaal-historisch opzicht.

English translation

The text above is the record as published by the Rijksdienst voor het Cultureel Erfgoed, in Dutch. The English below is a machine translation made by TreeAlive, not by the Rijksdienst voor het Cultureel Erfgoed; it has not been checked by a person. Where the two differ, the original is the record. Report a translation error: privacy@treealive.com

Factory complex of Nelle. Factory complex, consisting of a tobacco, coffee and tea factory - placed adjoining each other, with a combined length of approximately 220 metres - all three flat-roofed, but decreasing in height and at the tobacco and coffee factory provided with shed roofs; near the entrance a detached office building - with a concave and a right-angled wing, connected to the tobacco factory by means of an air bridge; directly opposite the tobacco factory a boiler house with outbuildings and chimney; opposite the coffee factory a central dispatch building; opposite the tea factory an L-shaped workshop and garage building; the whole was designed by J.A. Brinkman and L.C. van der Vlugt in 1925-'30, in New Sachlichkeit style, on the commission of C.H. van der Leeuw.

The factories were built using a reinforced concrete construction whereby - for the first time in the Netherlands - use was made of octagonal, mushroom-shaped columns and whereby the facades are non-load-bearing, but across the entire width provided with glazing bars set in very narrow steel frames of half the width in comparison to the office whereby the glass size is based on the contemporary horticultural glass; on the long sides the windows are in a ratio of 2:1 in relation to the steel parapets, for the benefit of as much visibility as possible for the personnel, on the short side the ratio is reversed due to the special rooms situated there and the parapets are of stone. Namely on the corners protruding stairwells in combination with lift shafts, toilet, washing and changing rooms, are placed, in order to keep the actual factory spaces uninterrupted; the buildings are also partially basements for this purpose.

The ground floor is by contrast higher in relation to the other storeys; the windows are longer for the benefit of as much daylight as possible, moreover a separate semi-basement corridor with black tiled facade is provided running along all the factory buildings at the front for the benefit of the management. The factory buildings have a separate foundation of concrete piles at the location of the weighing installations at their original positioning.

Furthermore, the buildings with the exception of the central dispatch building are provided with a surrounding, tubular railing at the top, as well as a separate piping system in the basements. The stairwells contain steel pipe railings, with red-painted railings; most doors are of steel.

The tobacco factory (1926-'28) has eight storeys and contains above the eastern stairwell a virtually all-round projecting viewing pavilion on a spiral staircase-shaped ground plan constructed in steel and glass, of which the upper windows have an almost quarter-round profile with round-cast glass panes. This stairwell otherwise has an entirely windowed front facade, which is continued around the corners, but on the S.E. side is further closed except for a circular window at ground level, near the projecting changing-room wing, which is left open on the ground floor whereby the three open-air columns emphasize the entrance.

The northern stairwell is executed in a comparable manner, albeit that the continued N.W. wall is entirely provided with windows; the N.W. wall of the actual factory space is by contrast entirely closed. On the ground floor on the N.E. side a low, entirely glazed intermediate space is built out. The actual factory space is fourteen bays wide and three bays deep. At the rear, however, the drying rooms - at the height of one storey and originally surrounded by a low series of windows - are built out and originally covered by a dozen rounded shed roofs.

The coffee factory (1928-'29) has six storeys, whereby due to the light incidence required for inspecting the coffee, the floor on the third storey is partially omitted, with the result that the glazed N.W. facade is not interrupted here; at the rear the three uppermost storeys recede slightly less than one bay; furthermore, the very topmost storey where the sorting department was originally situated has square columns in the middle, alongside mushroom columns; for the benefit of maximum and neutral light entry shed roofs are provided above each bay which due to the orientation towards the north are obliquely projected onto the remaining spaces.

The actual factory space is here sixteen bays wide and three, respectively two, bays deep. On the roof the name of the factories is displayed for advertising purposes by means of loose letters, supported by a steel construction, according to the design of the architects. The three bays wide stairwell, with annexes, has largely closed walls with low, horizontal window strips, and is left open on the ground floor, to emphasize the entrance there; it is positioned such that on the N.W. side still two bays of the factory space continue behind it.

The tea factory (1928-'29) has three storeys and is otherwise executed as the tobacco factory; the actual factory space is eight bays wide and three bays deep. Here there are still two original mixing machines manufactured by Bartlett & Son Ltd,. The adjoining stairwell with ancillary rooms recesses in relation to this on both sides; the N.E. wall is on the left side entirely closed and on the right side entirely provided with windows; the S.W. wall is mirror-image to this; the short end facade on the N.W. side is entirely provided with windows.

The office building (1928-'29) contains a concave wing at the height of three storeys and at the width of seven bays, a right-angled wing with a void into which a recess, and two storeys above, at the width of eight bays, and a wedge-shaped connecting space at the height of the void.

The whole is constructed using a skeleton construction of concrete columns and as regards the slanting 2-facade of steel columns and otherwise executed in a comparable manner to the factory buildings. This building too is basements and provided as much as possible with steel glazing bars. The two uppermost storeys of the concave wing have a light overhang on the recessed side; on the left are three garages, on the right the entrance area - with stoep - whereby again the enclosing wall is omitted.

The open-air supporting columns are clad with black tiles, as are those at the garages. On the corner of the concave and the right-angled wing the N.W. side at the height of the second storey the steel and glass air bridge connects to the tobacco factory; behind it a slightly projecting stairwell is provided with rounded side. Internally the office spaces are left as open as possible; in the right-angled wing the entire void is occupied by an office hall, in which several rooms executed in steel and glass are divided off; the inserted storey is intended for the management and contains a recessed gallery which is in open connection with the office hall. Here is still partly the original furniture, consisting of steel tube chairs and tables with hard-blue round tops.

The actual boiler house (1928-'29, extended 1930-'31) is constructed in reinforced concrete on a square ground plan and is covered by two round asphalt roofs; the S.E. wall is entirely closed except for the windows in the round top; the N.E. facade contains three low window strips; the built-out S.W. facade by contrast consists entirely of windows, as does the lower and even more forward-built pump room which is therefore internally supported by tapering downwards steel riveted columns with I-profile; the narrow and high water-pressure room, which is situated on the N.W. side of this and contains three steel riveted water tanks, manufactured by De Nayer at Willebroek, is entirely closed and also supports the even further rear-projecting coke storage, which rests on the N.E. side on a cylindrical shaft. In front of the S.W. corner of this complex is the tapered, octagonal chimney, which is reinforced on each corner with ribs, on a tiled plinth.

The block-shaped dispatch building (1929-'30) at the height of three storeys contains closed side walls and long facades entirely provided with windows, and is constructed according to the same building method as the opposite factory buildings towards which direct transport is made possible by means of glazed, four steel air bridges.

The workshops and garages are housed in an L-shaped works building (1929-'30) at the height of one storey, of which the facades consist entirely of windows; the interior spaces are divided by columns, whereby each bay is additionally lit via a shed roof.

This factory complex is regarded as a textbook example of New Sachlichkeit style in that the design is based on a prior analysis of the manufacturing process of the time and because of the further application of general functionalist principles such as the emphasis on as much light and air entry as possible, on functionality, favorable positioning and flexibility of the various spaces including possibilities for expansion, and because of the aesthetics connected with these principles - with emphasis on the transparency of the building volumes both internally and externally (dematerialization) - through the use of narrow steel profiles in the membrane facades and partition walls, as well as through the application of many uninterrupted spaces, on the inherent qualities of the materials applied and on the use of rhythm and clear proportions. Moreover, this is one of the first complexes with a mushroom-column construction and most of the piles in reinforced concrete and with the application of membrane facades, consisting of steel and glass, and thereby it is a pioneering work in the development of modern architecture and of international significance. Due to the great attention to the most favorable possible working conditions - maximum light and air entry, outlook, hygiene, presence of sports fields and library - this factory complex is moreover of importance in social-historical respect.

Nearby in the register

Other entries of the same register within about three miles of this one, by straight line.

Rijksmonumentenregister data: Rijksdienst voor het Cultureel Erfgoed, released under CC0 1.0. Record text is reproduced unchanged. Rijksdienst voor het Cultureel Erfgoed · CC0 1.0
See your own family's places on a living map