TreeAlive
‹ Sites and Monuments Record, Ireland

Sites and Monuments Record · Ireland

Industrial site

Ballybin (ratoath By., Cookstown Par.), County Meath, Ireland

The record

Townland
Ballybin (ratoath By., Cookstown Par.)
County
Meath
Country
Ireland
First-edition OS map
Not indicated
Latest-edition OS map
Not indicated
Coordinates
53.50893, -6.42073
SMR number
ME045-037----

Slide toward Today to fade the historical sheet and see the modern map underneath.

David Rumsey Map Collection, Stanford Libraries

Shown on 4 historical map sheets, the earliest the 1790 "Composite: Ireland." (David Rumsey Map Collection, Stanford Libraries).

Get directions ↗

This record in the National Monuments Service's Historic Environment Viewer ↗

The National Monuments Service's description

Located on a slight N-facing slope in a gently undulating landscape extending into a wet hollow at N. A geophysical survey (02R0051) by GBS Prospection of Area 22 ahead of a proposed N2 bypass for Ashbourne identified potential archaeological features in the vicinity of a rath (ME045-002----). Archaeological features were identified in testing (03E1327) by D. Bonner in 2003 and these were excavated from mid-April to mid-June 2004 within the road-take by L. McGowan (2009) under the same licence (excavations.ie 2004:1269). The testing and excavation revealed that many of the potential features were natural hollows but two waterholes or wells were excavated, while an industrial kiln and its associated pits was only partially excavated.

An area with kilns or furnaces connected with metal production was situated c. 80m NE of rath (ME045-002----). Three furnace-bottoms extend into a closed well or waterhole from the S, W and N sides and represent three closely related phases of activity as they shared some fills. Copper and copper alloy material was recovered from the area as well as siliceous waste that might have been associated with glass production. The S feature (dims 1.82m x 0.65m; D 0.2m) had six fills and a sample from one produced a C14 date of 90 cal. BC to cal. AD 80. The second (dims c. 1.7m x 0.8m; D 0.2m) was at the W of the well and had four fills. Alder charcoal from the bottom of the third furnace (dims 1.6m x 0.75m; D 0.13m) extending NW of the well produced a C14 date of 160 cal. BC to cal. AD 70. (McGowan 2009, 17-20)

The furnaces were dug into the fill of two intercut pits that may have served as a well or waterhole. The first steep-sided pit (diam. 2.2-2.3m; D 1.77m) has a small step on its E side and contained three major fills, each consisting of collapse with silting. A shallower pit (diam. 1.8-1.85m; D 1.14m) that was cut into it had four fills of sands, silts and clays. An animal bone from one of these produced a C14 date of 40 cal. BC to cal. AD 220.

Compiled by: Michael Moore

Date of upload: 21 December 2021

McGowan, L. 2009 N2 Finglas-Ashbourne Road Scheme: Report on Archaeological Excavation of Site 22, Killegland and Ballybin, County Meath. Licence: 03E1327. Unpublished report, CRDS

Nearby in the register

Other entries of the same register within about three miles of this one, by straight line.

Sites and Monuments Record data: National Monuments Service, Government of Ireland, licensed under CC BY 4.0. Record text is reproduced unchanged. National Monuments Service, Government of Ireland · CC BY 4.0
See your own family's places on a living map