Castle - ringwork

The National Monuments Service's description

In a commanding position on top of the SW end of a hill. The hill may have been scarped along the S side to provide material for the monument while creating a flat berm. In hilly terrain, under pasture. A river valley runs roughly E-W at base of steep slope of hill to S. There are good views in all directions, particularly extensive to the S with Mount Leinster visible on the horizon to the SE.
A raised oval earthen platform (diam. 38m N-S; 45.3m E-W) defined by scarp (H 1.22-2.05m; Wth 4.1-4.4m). The interior rises gradually (H 2.25m over 24m), up to a somewhat irregular internal enclosure (overall dims. 18.8m N-S; 18.4m E-W; dims. at top 9.8m N-S; 11.1m E-W) defined by a bank (Wth 5m; int. H 0.11m; ext. H 0.6m), which may be the remains of a collapsed building. A large deep quarry encroaches on the SW quadrant of the monument. There is no obvious entrance. There is some stone visible in the composition of the platform. There is a later narrow rectangular trench (L 14m; Wth 2.2m) in the NE quadrant and a shallow depression in the E quadrant near the field boundary. A field boundary runs NW-SE skirting the NW quadrant and another runs NW-SW skirting the edge of the NE sector. The elevated position of this monument, combined with the platform construction and raised interior suggest this is not a ringfort and is more likely to be a ringwork.

Compiled by: Jean Farrelly

Date of upload: 16 November 2017